• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: West Bengal, India
  • Brand Name: STP LTD

Specifications

PipeWrap - BT is a hot applied corrosion protection bituminous tape conforming to IS : 10221 Appendix B specification.

PipeWrap - BT is a hot applied corrosion protection bituminous tape conforming to IS : 10221 Appendix B specification. It comes in two thicknesses: two mm & four mm. The four mm thick
PipeWrap - BT is a four ply tape with two inner cores. The top core is of tough 45 gsm
fiber glass and the bottom core is of 15 micron high tensile strength HMHDPE. The
two mm PipeWrap - BT is a three ply tape without the fiber glass inner core. The specially formulated corrosion resistant bitumen compound provides high softening point, high penetration and high resistance to ageing. The tape comprises of high tensile strength thermofusible HMHDPE Film on both the side.

Uses
PipeWrap - BT is designed for application on buried and immersed pipes, fittings and appurtenances to protect them from high corrosive environment. For application on steel substrates and steel fittings, a coat of ShaliTex Primer (FD) is required.

 

Application
Pipelines when treated in the correct way with ShaliTex Primer (FD) and wrapped with PipeWrap - BT remain corrosion free for at least 25 years. The pipe surface should be cleaned thoroughly either with wire brush or should be sand blasted. On the cleaned surface ShaliTex Primer (FD) is applied at 90 ml/sqm to get DFT of 30 microns. The surface should be allowed to touch dry (30 minutes at least). For application on weld joints, necessary welding and testing of the joint should first be completed. The remaining procedure remains the same as that of pipe. Overlap of 50mm should be there on each side of the weld joint. PipeWrap - BT is recommended to be applied at the time of pipe erection and lowering inside the trenches to avoid any damage. While in storage, PipeWrap- BT roll must be stacked properly undercover.
The 2mm PipeWrap - BT is available in widths of 500mm/1000mm
The 4 mm PipeWrap - BT is available in widths of 150mm/250mm/350mm/500mm and 1000mm.

 

Health and Safety

PipeWrap - BT is non hazardous in normal conditions of use. Please refer to Health and Safety Data Sheets available on request. Technical Service For further technical information or advice on suitability for specific application, contact STP's Technical Representative.
PipeWrap - BT is a hot applied corrosion protection bituminous tape conforming to IS : 10221 Appendix B specification. It comes in two thicknesses: two mm & four mm. The four mm thick

PipeWrap - BT is a four ply tape with two inner cores. The top core is of tough 45 gsm
fiber glass and the bottom core is of 15 micron high tensile strength HMHDPE. The two mm PipeWrap - BT is a three ply tape without the fiber glass inner core. The specially formulated corrosion resistant bitumen compound provides high softening point, high penetration and high resistance to ageing. The tape comprises of high tensile strength thermofusible HMHDPE Film on both the sides.
Leaders In Pipe Protection Corrosion Protection Bitumen inside

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $
Learn More